Budget from the mandate, not the postcode
If you are budgeting for M&A advisory in Brisbane, start with the mandate rather than the postcode: Brisbane does not establish a standard fee. The reliable way to plan is to define the transaction and compare the complete fee structure and contractual commitments against the work you need.
A full sale, strategic acquisition, valuation-only brief and buyer-search mandate can require different work. The amount you pay therefore needs to be considered against the agreed scope, transaction circumstances and responsibilities, not treated as a fixed Brisbane market price.
Use this sequence before asking for figures:
- Define the decision, asset and transaction stage.
- Separate valuation work from wider transaction support.
- List the deliverables, payment components and contractual commitments.
- Compare proposals on total cost, scope and incentives together.
That sequence gives you a consistent brief to take into a discussion with an adviser.
Prepare a short description of the business or IP involved, the intended transaction, the support you expect and the information already available. You can then ask how the proposed work would be structured without assuming that a request confirms an appointment, valuation or engagement.
Separate the transaction process from the valuation
A valuation estimates the value of a defined business, interest or asset, while sell-side advisory supports the wider transaction process. That distinction matters because a valuation conclusion does not, by itself, describe buyer outreach, negotiation, process management or completion support.
M&A advice may cover target sourcing, valuation, deal structuring, negotiation and completion. Engagements may be retained, project-based, interim or advisory, so the label M&A advisory does not identify the full scope on its own.
Ask what the proposed engagement will produce at each stage. For example, a valuation brief may deliver an assessment of a defined asset, while a sale mandate may also include preparation, buyer contact, offer review and support through completion.
We advise selectively on M&A for IP-rich and technology businesses, from full-sale processes to strategic acquisitions.
Our valuations are prepared in accordance with APES 225 and International Valuation Standards by an AVI Certified Business Valuer (AVI 20281). The valuer chooses the appropriate valuation work for the case, so your brief should identify the decision the valuation needs to support.
Define the decision and the handoffs first
For an exit, define whether the focus is preparing the business, assessing value, approaching buyers, reviewing an offer, or planning the handoff to legal and tax advisers. Each focus points to a different set of outputs and conversations.
Put these questions into your initial brief:
- Are you preparing for a future sale, running an active sale, or reviewing an offer?
- Are you acquiring a target, seeking help with target sourcing, or assessing a proposed acquisition?
- Which business, ownership interest, IP asset or group of assets is involved?
- What support do you need beyond the valuation?
- Which matters will pass to legal, tax or accounting advisers?
Your sale brief should outline the transaction support you need beyond the valuation. That might include preparation, buyer approach, offer review or process support, but the brief should say which activities you expect rather than leaving the adviser to infer them.
An acquisition brief should identify whether you need target sourcing, valuation, deal structuring, negotiation or completion support. If you need only one stage, say so; if you need the process managed through completion, state that as part of the mandate.
A defined decision makes later fee comparisons clearer. You can test whether each proposal pays for the same work, rather than comparing one provider’s full process with another provider’s limited assignment.
Read the fee structure as a package
An M&A engagement fee structure customarily includes a retainer, a success or transaction fee, and expense reimbursement. Read all three together because a lower figure in one component may be offset by another payment, a longer billing period or approved costs.
The fixed component may be a monthly retainer, one-time work fee, launch fee or milestone payment tied to defined deliverables. The retainer or work fee compensates the adviser for preparation and ongoing execution before a transaction closes.
The contingent component is typically a success fee earned at closing.
Expense provisions address approved third-party and out-of-pocket costs. Depending on the mandate, an adviser may receive reimbursement for approved expenses or a separate fee for debt placement, equity financing, recapitalisation or another capital transaction.
Upfront fees can vary with transaction complexity, expected difficulty, adviser size and cost base, and competition for the mandate. An Australian fee guide says that, for most mid-market transactions, an upfront fee of between A$50,000 and A$250,000 would not be unexpected; that is a reported reference point, not a Sherwood fee or a quote for your transaction.
A separate fee guide states that advisory fees represent a significant cost - typically 1% to 5% of transaction value depending on deal size. Treat that as the cited guide’s broad statement, not as a fixed Australian rate or a standard percentage for your mandate.

Match the fee to the work being bought
A proposal should make the following points clear:
- What preparation and transaction materials are included.
- Whether buyer or target sourcing is included.
- Who handles negotiation and the period after a letter of intent.
- Which milestones trigger payment.
- When the success fee is earned and what counts as completion.
- Which approved expenses sit outside the stated fee.
An Australian fee guide reports that success fees are typically 4% to 6% on small deals under A$10 million and 1% to 3% on mid-market and larger transactions, falling as deal value rises. It presents these as reported typical figures, not a fixed rate, and they do not establish what Sherwood would charge.
Compare proposals only after matching their work boundaries. A proposal covering sourcing, negotiation and completion should not be placed beside a valuation-only or project-based assignment as though the two prices buy the same result.
Treat timing as a budgeting variable
A typical M&A engagement is 3 to 9 months per transaction, with longer engagements for active acquirers. That timeframe helps you ask when a retainer begins, what work occurs in each period and when the mandate ends.
A full sale process is typically seven to twelve months of intensive work, and may take longer where due diligence findings or regulatory clearance extend the timeline. The broader period applies to a full sale process, so do not use it as a universal duration for every M&A assignment.
Your budget should show the effect of time, not only the headline fee. Ask when monthly charges start and stop, whether work continues after a milestone, what happens if the transaction pauses and whether the proposed term matches the decision you are making.
Ask for a simple stage plan covering preparation, market contact, negotiation, due diligence and completion. You can then see which costs arise before a buyer or target is identified and which costs depend on a later transaction event.
The cited Australian fee guide says a tail is often 12 to 24 months. Because a tail operates after the main engagement, include it in your budgeting review even when the initial mandate appears short.

Check what happens when the process changes
Check whether the retainer is credited against the success fee and whether a minimum term applies; a six month minimum could still mean six months of retainer if the business sells in four. Record the answer beside the total fee rather than treating the retainer as automatically recoverable.
A break fee can apply if you walk away for reasons within your control or terminate the mandate early, but not every adviser charges one. Ask what event triggers it, how it is calculated and whether the engagement defines exceptions.
Exclusivity makes the adviser your sole mandate for the engagement term.
A tail provision may make the adviser’s fee payable if an identified transaction occurs after termination. It may last up to 2 years and may be limited to specified potential buyers or other transaction parties, so check who is covered and when the period starts.
In the Australian mid-market, advisers are often paid through a retainer while the sale runs and a success fee when it completes. The cited guide describes its typical ranges for businesses with A$2 million to A$25 million in EBITDA, not fixed rates for every business.
Before signing, place these terms on one page: retainer credit, minimum term, break fee, exclusivity, tail period, covered buyers or targets, expense approval and the point at which each fee becomes payable. Take the document to the relevant qualified adviser when its legal, tax or accounting effect matters.
Compare value, scope and incentives together
Compare the total fee, execution scope and incentive structure together. A proposal becomes easier to assess when you can see what is fixed, what depends on a transaction event and what work the adviser remains responsible for through closing.
Use the same questions for each proposal:
- What deliverables will you receive, and when?
- Which senior people will work on the mandate?
- How will preparation, buyer or target contact and negotiation be managed?
- What responsibility continues after a letter of intent?
- Which costs are included, reimbursed or charged separately?
- What circumstances change the agreed fee or term?
A proposal that appears inexpensive can become costly if it supports weak preparation, limited buyer competition, premature exclusivity or insufficient attention after an LOI. Price should therefore be read beside the process the proposal actually commits the adviser to run.
A higher fee is not automatically justified; it should correspond to senior involvement, defined deliverables, disciplined process management and accountability through closing. Ask the adviser to connect each payment to a responsibility you can identify.
Write down the reason you prefer one proposal before you decide. The reason might be a clearer mandate, stronger senior involvement, better-defined handoffs or a fee structure that matches your expected transaction stage; it should not be a vague impression that one headline number looks lower. Use a comparison table with one row for each proposal and separate columns for scope, deliverables, people, timing, fixed payments, contingent payments, expenses and engagement terms. Mark each item as included, excluded, separately charged or unclear, rather than treating an omitted item as included. Record the event that makes each payment due, because a monthly charge, milestone payment and success fee can arise at different stages of the same transaction. Record which responsibilities continue after a letter of intent and through completion, because two proposals can name the same service while assigning different work boundaries. Record whether the proposal covers a full sale, a strategic acquisition, a valuation-only brief or a defined stage, because those mandates do not buy the same process. Ask the adviser to resolve every unclear item in writing before you compare the total commitment. This method lets you compare what each proposal commits the adviser to do, not merely what each proposal says it costs.
Prepare a comparable request
Choose an adviser with experience in the type of decision you need, such as funding, acquisition, restructuring, licensing or sale preparation.
Prepare the financial information another adviser will need for a valuation, funding or transaction discussion. Keep the information consistent across proposals so differences in scope, assumptions and requested records remain visible.
A concise request can include:
- The business, IP or ownership interest involved.
- The intended sale, acquisition or other transaction.
- The current stage and preferred timing.
- The work you expect beyond a valuation.
- Available financial and operational information.
- Known information gaps, confidentiality needs or adviser handoffs.
Ask each adviser to respond to the same points: proposed scope, deliverables, people involved, payment components, expenses, timing, minimum term, exclusivity, break fee, tail and responsibilities through completion. A consistent request gives you a more useful comparison than asking only, What do you charge?
Do not delay a conversation because every record is not ready. State what is available, what is being prepared and what remains uncertain; the adviser can then explain whether the gap changes the proposed scope or the order of work.
Know when to involve another qualified adviser
Bring in the relevant qualified adviser before you commit when the proposed engagement creates tax consequences, legal obligations or accounting treatment that you need to understand. If you are unsure about a proposed term or commitment, contact the relevant qualified legal, tax or accounting adviser promptly before signing or agreeing to proceed.
Ask for legal review of terms such as exclusivity, break fees, termination rights, tail provisions, confidentiality and responsibility for introduced buyers or targets. Those terms can affect what you owe after the active process changes or ends.
Take questions about tax treatment to your tax adviser and questions about accounting treatment to your accountant. This is particularly relevant when the transaction involves a business sale, an IP asset, a restructuring, a financing event or a change in ownership.
Before you sign, make sure you can identify the decision, the asset, the deliverables, the payment triggers and the handoffs. Pause the commercial decision if a term could bind you beyond the period or transaction you intended to authorise.
Use the M&A adviser to clarify commercial scope and process responsibilities, and use the relevant legal, tax or accounting adviser for the questions within that professional role. Keeping those roles distinct makes the proposal easier to assess.
Request a tailored M&A discussion
We offer M&A advisory expertise to help clients navigate challenges in mergers and acquisitions. A useful first discussion can start with the transaction purpose, the business or assets involved, the support you expect and the information already available.
Your brief should still make clear whether you need preparation, valuation, buyer approach, offer review or support through completion.
We are a boutique, investment-bank-grade, conflict-free advisory. Relevant services include business, IP and AI valuations, licensing advisory, and buy-side and sell-side M&A advisory.
Use a consistent transaction brief so the discussion can focus on the scope you need and the information still to be prepared.
Prepare the transaction purpose, business or assets, current stage, expected support and available financial information before you make contact. A follow-up request does not confirm an appointment, formal valuation or advisory engagement.
What should I clarify before requesting M&A advisory fees?
How much does M&A advisory cost in Brisbane?
There is no reliable Brisbane-specific fee benchmark, and location alone does not set the price. Cost depends on the agreed mandate, transaction circumstances, deliverables, payment structure and contractual terms, so request a tailored proposal rather than relying on a standard local rate.
What is usually included in an M&A advisory fee structure?
An engagement commonly includes a retainer or other fixed payment, a success or transaction fee, and approved expense reimbursement. Some mandates may also include milestone payments or separate charges for financing-related work, so confirm what is included, when each payment becomes due and whether expenses require approval.
Which engagement terms should I review before signing?
Check the minimum term, retainer credit, payment triggers, exclusivity, termination rights, break fee and tail provision. A tail may preserve a fee if a transaction with an introduced buyer occurs after termination, so confirm its duration and which buyers or targets it covers; obtain legal advice on the effect of these terms.
Do I need M&A advisory or only a business valuation?
A valuation estimates the value of a defined business, ownership interest or asset. M&A advisory supports the wider transaction process, which may include preparation, buyer or target contact, negotiation and completion, so choose the narrower valuation brief only when you do not need broader process support.
What information should I prepare before requesting an M&A proposal?
Prepare the business, IP or ownership interest involved; the intended sale or acquisition; the current transaction stage; expected timing; support required beyond a valuation; available financial information; and known information gaps. Asking advisers to respond to the same brief makes differences in scope, deliverables and fees easier to compare.
