An IP audit turns an unseen asset base into decision-ready information
An intellectual property audit reviews the intellectual property state of affairs in your business. For an Australian technology company, that means building a practical picture of the assets your products, platform and research depend on, then examining their ownership, protection, use and associated risks.
The audit can identify existing and potential IP assets, gaps in protection, ownership issues, underused assets and third-party IP use that may create risk. It is therefore more than a list of patents or trade marks. It is a way to connect what your business has created or uses with the decision you need to make next.
The useful question is not simply whether your company has IP. The useful question is whether you can explain which assets matter, who owns them, what agreements support that position, how they are protected, whether they are being used commercially and where uncertainty remains. That information gives you a clearer starting point for protection work, licensing discussions, funding preparation, risk management or a transaction.
Start with the business decision the audit needs to support
Your upcoming decision should determine the audit’s emphasis. An audit for a new product launch may focus on the assets being created, the people and contractors involved, third-party material and protection gaps. An audit before a funding discussion may focus on the assets behind the product, unresolved ownership questions and the records that allow you to explain them clearly.
Use the intended decision to set the scope:
- Protection: identify important assets, the controls around them and gaps that need attention.
- Commercialisation: separate assets in active use from assets that are available, underused or not connected to a current product plan.
- Licensing: establish what you own or can license, what third-party rights affect use and which terms need closer examination. Understanding your IP before licensing negotiations can support more informed decisions about terms and conditions and assist in determining fair royalty rates.
- Funding: organise the relationship between your technology, the assets supporting it and the unresolved questions that could affect a funder’s assessment.
- Acquisition or sale: prepare an asset and agreement record that can support focused questions during transaction planning.
- Risk management: identify third-party use, weak confidentiality controls, ownership uncertainty and protection gaps that need an assigned response.
Choose one primary decision and record secondary purposes separately. A broad inventory is useful, but an undefined audit can produce a long list without a clear order of action.
Before collecting documents, write down three answers: What decision is approaching? Which assets could affect that decision? What would you need to know before committing capital, signing an agreement, approaching a funder or entering a transaction? Those answers give the audit a usable boundary without assuming that every asset deserves the same level of review.
Map every IP asset used by the technology business
Your audit should begin with a comprehensive inventory of intellectual assets that are, or will be, used during new product development. Start with the product or platform rather than with the registration database. Trace the technology from research and development through testing, deployment, customer use and planned releases.
For an Australian technology business, the inventory may include:
- patents and patent applications;
- trade marks, product names, domain names and branding;
- copyright material, including software, technical documentation and other original works;
- registered or registrable designs;
- trade secrets, confidential know-how and internal technical information;
- software components, proprietary platforms, models, algorithms and development tools;
- data assets and datasets used to build, operate or improve the product; and
- current and planned research and development outputs.
Copyright and trade secrets may form part of the review. The inventory is not a conclusion that every item has the same legal status. It is a record of what your business relies on so that each item can be considered appropriately.
For each item, record a plain description, the product or project that uses it, the people or organisations involved in creating it, where the relevant records sit, whether it is used commercially and whether it is planned for future development. Cataloguing and describing assets creates the foundation for examining ownership, legal status and protection systems. Keep the record live as your research pipeline and product roadmap change.

Check whether the business owns what it depends on
Ownership is a separate question from possession. Your company may hold code in a repository, files on its systems or a product created under its direction, but the audit still needs to examine how ownership and legal status were recorded. The review can identify ownership problems and show where the supporting arrangements require attention.
For employee-created IP, ask whether ownership was captured in the employment agreement and whether confidentiality and other protective clauses are included. For contractor-created IP, ask the same questions in the engagement agreement. Trace the contributors to important software, inventions, datasets, documentation and technical know-how rather than assuming that the person who delivered the work transferred every relevant right.
Examine jointly owned and third-party IP separately. Joint ownership may require permission for the way you use an asset, while third-party material may require a licence covering your actual use. Ask:
- Who created or supplied the asset?
- What agreement governs its use?
- Is your intended use covered by that agreement?
- Does another party need to give permission?
- Where is the evidence of that permission or licence?
Treat an unanswered question as an item for resolution, not as proof that the business owns the asset or can use it without restriction.
Review the agreements and controls that support IP ownership
A useful audit combines records with conversations and targeted searches. Relevant information can come from documents, reports, agreements, contracts and computer databases. Interviews, surveys, observation and relevant database searches can add information that is not obvious from the document folder alone.
Assemble a document pack that includes, where relevant:
- employee and independent-contractor agreements;
- confidentiality, invention-assignment and other protective provisions;
- joint-venture agreements;
- licence agreements and records of permissions;
- research-and-development agreements;
- development statements, project records and invention disclosures;
- registration records and internal IP registers; and
- records showing how third-party components, data or other material may be used.
Review the documents against the asset inventory. A contract that exists in a folder is not enough; you need to connect it to the asset, contributor, project and permitted use it is meant to cover.
Trade secrets need a different question from registered rights. Trade secrets are not registered with an IP office and can be protected through secrecy and confidentiality agreements. Your review should therefore examine who can access confidential information, how it is described, which agreements apply and whether the controls match the way the business actually works.
Speak with the people who understand the technology, commercial arrangements, research and development work and personnel records. A short interview can reveal an unrecorded contributor, an inherited licence, a shared project or a product feature that was built from an external component. Record each point against the relevant asset and agreement so that follow-up work has an owner.

Find protection gaps, underused assets and third-party exposure
The audit becomes useful when it separates different kinds of finding. An asset can be important but poorly documented, well documented but underused, commercially active but exposed to third-party rights, or protected in one area while a related part of the product remains uncovered. The review can identify protection gaps, ownership issues, underused assets and third-party IP use that may create risk.
For each material asset, record four practical positions:
- What exists: describe the asset and the product, service or research project connected to it.
- What supports it: identify the owner, contributor records, agreements, registrations, permissions and confidentiality controls.
- How it is used: note whether it supports current revenue, a planned release, an internal process, a licence discussion or no current activity.
- What remains uncertain: state the missing record, unresolved ownership question, protection gap or third-party dependency.
This format prevents an asset register from becoming a catalogue with no decision value.
Do not treat registration as the only form of protection. Patents, trade marks, copyright, designs and trade secrets may require different records and controls. In particular, a trade secret depends on secrecy and confidentiality arrangements rather than registration with an IP office. Compare the protection record with actual access, development and commercial practices, then assign a specific follow-up action to each gap.
Underused assets deserve a separate commercial question: could this asset support a product, licence, partnership or other business decision, or should it remain inactive? The audit can help you identify that possibility. It does not decide the commercial outcome or establish that an asset will generate revenue.
Apply the findings to licensing, funding and transaction planning
An audit should end with decision questions, not only observations. Once you know which assets exist, who appears to control them, what agreements apply and where uncertainty remains, you can connect each finding to the decision ahead. That may mean prioritising a protection task, resolving an ownership question, clarifying third-party use or separating active assets from those that are not part of the near-term plan.
Licensing discussions require a clear view of the assets and rights being discussed. Understanding your IP before negotiations can support more informed decisions about the terms and conditions and assist in determining fair royalty rates. Use the audit record to identify the asset, the party with authority to grant rights, the permitted use, any relevant restrictions and the questions that need to be resolved before terms are negotiated.
For a capital raise, acquisition or sale, use the audit to organise the information that explains what the technology business owns, uses or depends on. Separate confirmed records from open questions. That distinction helps you decide what needs resolution before sharing information or entering detailed discussions.
Turn findings into a short action list:
- resolve ownership or permission questions attached to material assets;
- close protection or confidentiality gaps that affect the intended use;
- document third-party dependencies and licence conditions;
- assess whether underused assets have a defined commercial purpose; and
- prepare a focused information pack for the next adviser, funder, licensee or transaction discussion.
Give each action a responsible person and a decision date. A clear sequence is more useful than treating every finding as equally urgent.
An IP audit is not an IP valuation
An IP audit examines assets, ownership, protection and risks. An IP valuation addresses the value of IP assets. The two exercises can inform the same strategic decision, but they answer different questions.
Use this distinction when deciding what you need:
- Ask for an audit when you need to understand what exists, who created or controls it, which agreements apply, how it is protected and where third-party exposure or uncertainty remains.
- Ask for a valuation when you need an opinion about the value of identified IP for a stated business purpose.
- Consider whether both are relevant when a funding, licensing, acquisition, sale or shareholder decision requires a clearer factual record and a value assessment.
An audit does not itself produce a valuation. A valuation does not replace the work of identifying ownership, agreements, protection controls and third-party use.
We provide AFSL-licensed valuations of businesses, IP and AI technology under AFSL Licence No. 563351. If valuation becomes part of your decision, the valuer selects the appropriate approach case by case for the stated purpose and available information. Start by defining the decision and the asset population rather than assuming that an audit and a valuation are interchangeable.
Prepare the records and questions for an IP audit
You can make the first discussion more productive by preparing the information in a clear sequence:
- Define the decision: write down whether the immediate purpose is protection, commercialisation, licensing, funding, risk management, acquisition or sale.
- Create the inventory: list the patents, trade marks, copyright material, designs, trade secrets, software, platforms, data assets and research and development outputs connected with the decision.
- Map contributors: identify employees, contractors, founders, research partners, joint-venture participants and third parties involved in creating or supplying each material asset.
- Collect agreements: gather employee, contractor, joint-venture, licence and research-and-development agreements, along with confidentiality and ownership provisions.
- Gather operational records: include project records, development documents, internal registers, database information, registration records and evidence of permissions.
- Mark uncertainty: list missing documents, unclear ownership, unknown licence terms, access-control questions and assets whose commercial use is not understood.
Take focused questions to the adviser handling the review:
- Which assets are material to the decision I have identified?
- What evidence connects each asset to the business and its contributors?
- Do the employee and contractor arrangements address ownership and confidentiality for the work performed?
- Are jointly owned or third-party assets used within the permissions or licences available?
- Which protection gaps should be addressed first?
- Which records require a legal, technical, commercial or valuation specialist to examine them further?
- What should be resolved before I share information, negotiate a licence or enter a funding or transaction process?
You may need help from a professional adviser to answer some audit questions. Bring the underlying documents, not only a summary, so that the review can test the asset register against the arrangements that support it.
The information-gathering process may use records and databases together with interviews, surveys, observation and relevant database searches. The right mix depends on the decision, the size of the asset base and the questions raised during the review. Keep a dated issue list showing the question, evidence still needed, responsible person and agreed next action.

Decide whether an IP audit is the right next step
An IP audit is a sensible next step when an important business decision depends on knowing what your technology business owns, uses, protects or may be able to commercialise. It can give you a structured inventory, expose ownership and agreement questions, identify protection gaps and organise the information needed for a licensing, funding, risk or transaction discussion.
Before you begin, check that you can state:
- the decision the audit must support;
- the products, platforms or research projects within scope;
- the people and organisations that contributed to the relevant assets;
- the agreements, licences and records available for review; and
- the questions that may require legal, technical, commercial or valuation input.
It may also identify an ownership or protection issue that needs separate specialist work, and it does not by itself establish every risk, settle a disputed legal position or produce a valuation. A suitably qualified professional should decide what advice is appropriate for your circumstances.
If the decision is material, define the scope, gather the records and take the unresolved questions to an appropriately qualified adviser before committing to the next stage.
What should a CEO ask before commissioning an IP audit?
Does an intellectual property audit cover unregistered assets such as software, data and trade secrets?
Yes. It can cover software, proprietary platforms, data assets, research and development outputs, confidential know-how and trade secrets, as well as patents, trade marks, copyright and designs. Including an asset in the inventory does not establish its legal status or ownership; those questions require separate examination.
What should an Australian technology business do when ownership of an IP asset is unclear?
Record the uncertainty against the asset and trace its contributors, agreements, permissions and actual use. Do not assume that possession of code, data or documents proves ownership. An appropriately qualified legal or other specialist adviser may need to examine employee, contractor, joint-venture or third-party arrangements before the asset is used in a material funding, licensing or transaction decision.
Should a business arrange an IP valuation immediately after an IP audit?
Not necessarily. A valuation addresses the value of identified IP for a stated purpose. Consider valuation once the relevant asset population and business purpose are sufficiently clear; the valuer selects the appropriate approach case by case.
