The maximum net asset value test is a checkpoint, not an eligibility conclusion
The Australian net asset value test is one condition in the ATO’s framework for the small business CGT concessions. Passing it does not, by itself, establish that you qualify for a concession.
That distinction matters if you are preparing to sell, restructure or step back from an Australian business. You may need to understand the value and ownership of assets across more than the operating company, while also addressing separate eligibility conditions, entity relationships and the rules applying at the relevant time.
This guide gives you a way to organise the question. It does not calculate your net value, classify your assets, apply a threshold to your circumstances or determine your concession entitlement. Those conclusions depend on your facts and on the Australian rules applicable to the transaction or CGT event.
Use the review in two tracks:
- map the assets, entities, relationships and records that may be relevant to the tax analysis;
- identify whether defined valuation evidence is needed for a business, ownership interest, intellectual property or technology asset.
Keep those tracks connected, but do not treat a valuation as a substitute for tax advice.
Overview
The maximum net asset value test asks whether the net value of the relevant CGT assets, after the applicable liability treatment, is within the current maximum threshold; it is one condition in a broader CGT concession assessment. The net value calculation is not limited to the operating business’s assets: the selected ATO material says it includes all CGT assets of the entity unless an asset is specifically excluded.
Your first task is therefore not to put one figure into a formula. Start by identifying the entities, assets, relationships and relevant dates that may affect the assessment. Then ask a tax adviser to confirm the current threshold, definitions, exclusions, liability treatment and other eligibility conditions that apply to your facts.
A valuation answers a different question. It determines an estimate of value for a business, an ownership interest, a security, an intangible asset or another asset or liability. It does not decide whether you qualify for a CGT concession, and it does not by itself verify the information supplied about the asset or business.
The practical sequence is:
- Confirm the current ATO framework with your tax adviser.
- Build an asset, liability and ownership map before relying on a figure.
- Separate business-use and active-asset questions from the net-value review.
- Define any valuation requirement by asset, purpose, date and intended user.
- Take an organised records pack and a written list of unresolved questions to the relevant advisers.
Start with the current ATO eligibility framework
The small business CGT concession framework contains more than one condition. The ATO material identifies the maximum net asset value test as one condition, so a result under that test cannot be treated as a complete eligibility decision.
The exact pathway also depends on the taxpayer, the CGT asset, the business relationships and the concession being considered. A business sale, a restructuring and a disposal of an asset may raise different questions. Do not assume that the same conclusion follows from the same asset schedule in every situation.
The selected ATO guidance identifies an eligibility pathway for a CGT small business entity with aggregated turnover of less than $2 million.
Treat that figure as a feature of the selected guidance, not as a complete statement of every current rule or pathway. Ask your tax adviser to confirm whether it is the relevant test, threshold and date for your circumstances before you rely on it.
At the start of the discussion, give your adviser:
- the proposed CGT event or transaction and its expected timing;
- the taxpayer or entity that owns the relevant asset;
- the businesses carried on by the relevant entities;
- any known affiliate, control or connection relationships; and
- the concession or tax outcome you are considering.
This makes the question specific without asking you to reach a conclusion before the facts have been reviewed.
Define the asset pool before considering value
The asset pool for the review is broader than the assets shown on the trading company’s operating balance sheet. The selected ATO material says that the net value calculation includes all CGT assets of the entity unless an asset is specifically excluded.
That means you should begin with an inventory, not with a preferred valuation figure. Include the assets held by the relevant entity for discussion with your adviser, then ask which items are included, excluded or treated under a separate rule.
Your initial inventory may need separate lines for:
- land, premises or other property interests;
- cash and financial assets;
- plant, equipment, stock and other operating assets;
- contractual rights and ownership interests;
- intellectual property, data assets and technology rights; and
- assets held outside the operating business but connected with the ownership structure.
This is a working records list, not a tax classification. Do not assume that an item belongs in the calculation merely because it appears here, or that an item is irrelevant because it is not used day to day.
To keep the inventory from becoming an informal conclusion, give each line a status: confirmed for review, potentially relevant, unresolved or awaiting adviser classification. Keep two questions separate: whether an item belongs in the review and what value should be assigned if it does. If the same right appears in more than one agreement, link the documents to one inventory line and explain the relationship. This makes uncertainty visible instead of allowing an incomplete list to look like a completed calculation.
Value and inclusion are separate questions. A valuation can estimate the value of an asset, business or ownership interest, but your tax adviser must address whether the asset is relevant to the applicable eligibility test and how the current rules treat it.

Map ownership, affiliates and connected entities
The ownership map can matter as much as the asset list. The ATO material addresses assets of the taxpayer, connected entities, affiliates and certain entities connected with affiliates, subject to stated business-use conditions.
Draw the structure as it exists for the relevant period. Show the operating company, holding companies, trusts, partnerships and other entities that own assets, receive income or participate in the business. Record the people or entities with ownership, control or other relationships that your adviser may need to examine.
The relevant turnover information may span more than one entity.
Prepare the annual turnover information by entity and identify the period to which each figure relates. Your adviser can then determine which relationships and amounts belong in the applicable analysis.
The cited ATO passage attaches business-use conditions to the assets addressed in that rule. It also states that an asset used in an entity’s business solely because of an affiliate relationship is not included under that particular rule.
Do not resolve that boundary from a diagram alone. For each potentially relevant asset, record its owner, user, business use, period of use and relationship between the entities, then ask your tax adviser to apply the current rule.
Use the structure chart as a reconciliation tool rather than as proof of treatment. Compare who owns an asset with which entity uses it and note every mismatch. Attach the agreement, register entry or other record that explains the arrangement, and identify when it began or changed. If the ownership and use maps do not align, highlight the issue for review instead of assigning the asset to the entity that produces the simpler answer. This helps the adviser test the stated business-use conditions against the actual relationship and relevant period.
Separate the net asset value test from the active asset test
The active asset test is a separate question from the net asset value test. An asset may be relevant to the asset pool and still require a distinct analysis of whether it is active for the relevant CGT concession.
The selected ATO material says an asset is generally active when you, an affiliate or a connected entity use it, or hold it ready for use, in running a business. For an intangible asset, the material says it must be inherently connected with the business.
The ATO material also says to consider a CGT asset as a whole when determining whether it is active, rather than looking only at the portion used in the business. That principle can matter where an asset has mixed use or several rights attached to it.
Describe the asset as a complete right or item in your records. Note the business use, non-business use and any relevant changes over time, but leave the final active-asset conclusion to your tax adviser.
Keep two headings in your working paper:
- Net-value review: which assets and entities may be included, and how the current rules address them.
- Active-asset review: whether a particular CGT asset satisfies the separate active-asset conditions for the concession under consideration.
That separation prevents a business-use conclusion from being treated as an answer to the entire eligibility question.
Flag passively held and partnership situations
Passively held assets and partnership interests need a separate adviser conversation. The ATO material addresses situations in which you do not carry on a business yourself but your asset is used in a small business operated by an affiliate or connected entity. It also addresses certain partnership assets and partner-owned assets used in a partnership business.
Those categories can depend on the precise owner, user, partnership interest and business relationship. A label such as “investment property”, “partner asset” or “company asset” is not enough to decide the treatment.
Flag any of these facts in your records pack:
- an asset owned personally but used by a business;
- an asset owned by one entity and used by another;
- a partnership interest or asset held through a partnership;
- a partner-owned asset used in partnership operations; or
- a business relationship that changed before the proposed transaction.
Ask your tax adviser to identify which ATO pathway applies and what supporting records are required. Do not include or exclude the asset on your own conclusion.
Keep liabilities, exclusions and current thresholds open for verification
An asset schedule is not the same as a completed net-value calculation. The ATO material says all CGT assets are included unless specifically excluded, but the exact exclusions and the treatment of liabilities must be confirmed against the current rule and your facts.
Do not assume that every liability reduces the relevant value in the same way, or that an exclusion applies because an item is described informally. Record the underlying facts and ask your tax adviser to identify the applicable treatment.
We consider details about your assets, liabilities and operational metrics vital for a business valuation. That same information can help your advisers understand the commercial context, but a valuation record does not replace the tax analysis.
Prepare a liability schedule with the creditor, borrower, amount, date, security, purpose and related entity where those details are available. Mark items that are disputed, contingent, intercompany or changing. Your adviser can decide which facts matter under the current rules.
Ask your tax adviser to confirm:
- the threshold and definitions that apply on the relevant date;
- which exclusions are available under the applicable pathway;
- which liabilities, if any, are taken into account and on what basis;
- whether connected and affiliate entities change the analysis; and
- whether a later transaction date could change the answer.
This is a verification step, not an invitation to apply an old threshold or generic checklist to a new transaction.
Before relying on the schedule, preserve the source and date for each material liability and link it to the relevant borrower, entity and supporting agreement. Mark whether the amount is settled, changing, disputed or dependent on information that still needs confirmation. Do not turn a missing amount into zero or treat a familiar label as proof of the applicable treatment. The purpose of this preparation is to show the adviser which facts are established and which require a conclusion under the current rules; it is not to create a self-assessed net-value figure.
Separate tax eligibility from valuation evidence
Tax eligibility and valuation evidence serve different purposes. A valuation determines an estimate of value for a business, business ownership interest, security, intangible asset or other asset or liability. It does not itself decide whether you satisfy the CGT concession conditions.
That distinction is especially relevant when your business owns intellectual property, software, data assets or technology rights. The value question may be material to a sale, restructuring or transaction discussion, while the tax question may require a separate analysis of ownership, use, timing and eligibility.
A valuation does not, by itself, verify the information about the business, ownership interest, asset or liability being valued. You therefore need to distinguish between:
- the records you provide;
- the assumptions and scope agreed for the valuation;
- the estimate of value produced within that scope; and
- the tax adviser’s conclusion about how the relevant rules apply.
A well-organised valuation file can support a discussion, but it cannot turn incomplete ownership or financial records into an established tax fact.
Before requesting valuation work, write down what decision the result must support. For example, you may need evidence for a proposed sale, a restructuring discussion, an ownership review or an assessment of a defined business or IP asset. The purpose determines the scope you need to discuss.
Decide when specialist valuation input is useful
Specialist valuation input is useful when the value of a business, ownership interest, IP or technology asset is material to the decision you are making and a simple internal estimate would not answer the question. It can also help when several assets or rights need to be considered within a defined transaction or tax-related scope.
The need is stronger when the information is disputed, incomplete or difficult to explain, or when another party such as a buyer, investor, lawyer or the ATO may scrutinise the result. That does not make the valuation a tax eligibility decision; it defines the value evidence that can be considered alongside tax advice.
Use the purpose of the enquiry as the decision criterion. If the immediate question is whether an asset, entity or relationship falls within a current tax rule, begin with the tax adviser. If a sale, restructuring or ownership decision turns on an estimate of a defined business, ownership interest, IP or technology asset, discuss valuation scope separately. Where both questions matter, state them separately at the outset so the valuation is not asked to decide tax eligibility and the tax review is not asked to supply value evidence outside its scope.
We conduct valuation analysis and report within an agreed scope for a defined business, ownership interest, IP or technology. Before work begins, define:
- the asset, business or interest being valued;
- the valuation date and purpose;
- the intended users of the report;
- the records and assumptions to be considered; and
- the questions the report is expected to address.
A defined scope gives you a clear boundary around what the report does and does not establish.
We prepare valuations using the methodology best suited to your situation, with results designed to withstand scrutiny from buyers, investors, lawyers or the ATO. The method is selected case by case by the valuer; you do not need to prescribe it in your initial brief.
Your practical task is to explain the decision, asset, date, records and intended reliance. The valuation professional can then discuss the appropriate scope.
Prepare an adviser-ready records pack
Organise the pack into short sections:
- Ownership and structure: company, trust, partnership and shareholder records; an entity chart; changes in ownership or control; and agreements governing relevant assets.
- Asset register: property, cash, equipment, stock, contracts, investments, IP, data and technology rights, with owner, location, use and acquisition or transfer records.
- Liability schedule: loans, security, creditor, borrower, intercompany balances, disputed amounts and any terms that affect the obligation.
- Financial information: accounts, management reports, budgets, forecasts, tax records and reconciliations for the relevant periods.
- Operational metrics: customer, revenue, contract, staff, product, development and other measures that explain how the business operates.
- Transaction context: the proposed sale, restructure or exit decision, expected timing, parties involved and the question the advice must answer.
For IP and technology, add ownership documents, registrations where relevant, licences, assignments, development records, contributor arrangements, renewal information, restrictions on use and evidence of how the rights support the business. Keep legal ownership questions separate from the estimate of value.
Name the source and date of each important document. Flag records that are missing, inconsistent or based on an assumption instead of presenting them as settled facts.
Send the pack with a one-page decision brief: what you are considering, what date matters, which entity or asset is involved, what you need from the tax adviser, and whether a defined valuation scope is also required. That gives each professional a clear starting point without asking one report to answer every question.

Ask questions that expose gaps before relying on the result
Take these questions to your tax adviser:
- Which current eligibility pathway and threshold apply to my proposed CGT event?
- What date controls the assessment, and could the transaction timing change the analysis?
- Which entities, affiliates and connected entities must be considered?
- Which assets may be included, and which exclusions need to be tested?
- How should the identified liabilities be treated under the applicable rule?
- Is the asset also being considered under the active asset conditions?
- Do any passively held or partnership facts change the pathway?
- What records support each material conclusion?
Ask for the answer to be tied to the relevant entity, asset, period and proposed transaction rather than expressed as a general assurance.
If valuation input may be needed, ask:
- What exactly is being valued: the whole business, an ownership interest, IP, technology or another asset?
- What is the valuation date and purpose?
- Who is expected to use the report, and what decision will it support?
- What information and assumptions will be within scope?
- How will incomplete, contradictory or disputed information be handled?
- Will the work pause, record an assumption, propose additional procedures or require another adviser to decide the issue?
- What conclusions will the report support, and what conclusions will remain outside scope?
Use these questions to make the enquiry precise.
Do not hide a gap in a spreadsheet note or carry an unexplained assumption into the final figure. Ask who owns the unresolved issue and what happens next. Where information is incomplete or contradictory, the provider should explain whether work pauses, an assumption is recorded, additional procedures are proposed or another adviser must decide the issue.
After the discussion, classify each material point as a supplied fact, an adviser interpretation, an assumption requiring confirmation or an unresolved issue. Record the document or clarification needed to move it forward, who is responsible for obtaining it and whether the point affects the tax review, the valuation scope or both. This creates a usable follow-up list and makes it harder for an unresolved ownership, asset or liability question to disappear into a final summary. Revisit the list if the transaction date, entity, asset or proposed use changes.
Use separate tax and valuation reviews before a sale or exit decision
Before a sale, restructuring or exit decision, run two linked reviews. Your tax adviser should assess the current eligibility framework, the relevant entities and assets, the applicable exclusions and the facts controlling the proposed CGT event. A valuation professional can estimate the value of a defined business, ownership interest, IP or technology asset where the decision requires that evidence.
The maximum net asset value test remains one condition in the broader CGT concession framework. A valuation remains an estimate of value. Neither track replaces the other.
A practical sequence is:
- Give both advisers the same ownership map, asset register and transaction brief.
- Ask the tax adviser to identify the current rules and the facts that must be established.
- Define any valuation scope around the asset, purpose, date and intended users.
- Reconcile assumptions and unresolved information between the two workstreams.
- Keep tax conclusions, valuation conclusions and commercial decisions in separate records.
This sequence helps you understand which document answers which question before you rely on it in negotiations or planning.
If the proposed transaction changes while the work is underway, tell both advisers. A change in buyer, date, entity, asset scope or transaction structure may change the question being answered. Obtain a clear view of whether the existing work remains within scope before carrying its conclusions into the revised decision.

Know what this guide cannot establish
This guide cannot determine your eligibility for a small business CGT concession. The test is one condition in the ATO framework, and passing it alone does not establish concession entitlement. Your result depends on the relevant entity, asset, relationships, timing, transaction and current rules.
This guide also cannot decide whether a particular asset is included, excluded or treated under a specific liability rule. The selected ATO material says the calculation includes all CGT assets unless specifically excluded and addresses assets of taxpayers, connected entities, affiliates and certain entities connected with affiliates subject to business-use conditions. Applying those principles requires the facts of your structure and the current Australian guidance.
Use the guide to organise records and questions, not to produce a self-assessed answer. If you cannot identify the owner, user, date, relationship, value or supporting document for a material item, mark it as unresolved and take it to the appropriate adviser.
Use the records pack to prepare your next adviser discussion
Before discussing valuation input, identify the defined business, ownership interest, IP or technology and the purpose of the work. Any valuation input is limited to the defined business, ownership interest, IP or technology and the agreed scope.
A qualified tax adviser decides how the current eligibility rules apply to your circumstances. Our role, where appropriate, is to discuss defined valuation input and the records needed for that work; it does not determine your tax eligibility or concession entitlement.
Bring the records pack and the unresolved-question list to the discussion. Ask each professional to identify the conclusion they can provide, the assumptions they need, and the issues that remain outside their scope.
What should you confirm before relying on the maximum net asset value test?
Does passing the Australian net asset value test mean a business qualifies for small business CGT concessions?
No. It is one condition within the broader Australian CGT concession framework. Eligibility may also depend on the relevant entity, asset, ownership relationships, timing, active-asset requirements and the concession being considered. A tax adviser must assess those facts under the rules applicable to the relevant CGT event.
Which assets should an owner flag before reviewing the net asset value test?
Begin with all potentially relevant CGT assets, not only assets recorded on the operating company’s balance sheet. Flag property, cash, investments, equipment, contracts, ownership interests, intellectual property, data and technology rights, as well as assets held by related entities. Record each asset’s owner, user, business purpose, relevant dates and supporting documents; do not assume inclusion or exclusion without adviser review.
Can assets held by affiliates or connected entities affect the assessment?
They may. The ATO material addresses assets held by the taxpayer, connected entities, affiliates and certain entities connected with affiliates, subject to stated business-use conditions. Prepare an entity chart showing ownership, control, business use and changes over time, then ask your tax adviser which relationships and assets are relevant under the current rules.
What records should an Australian business owner take to an adviser?
Prepare an ownership and entity chart, asset register, liability schedule, financial information, operational records and a brief describing the proposed sale, restructure or other CGT event. Include the relevant dates, asset owners and users, affiliate or connected-entity relationships, and any incomplete or contradictory information. Ask the adviser to identify which records support each material conclusion.
When might a business or IP valuation be useful in a net asset value review?
Valuation input may be useful when the value of a business, ownership interest, intellectual property or technology asset is material to a sale, restructuring or tax-related discussion, particularly where the information may be scrutinised. It provides an estimate of value within an agreed scope; it does not determine concession eligibility, verify all supplied information or replace tax advice.
